MRL traction lift with gearbox in the shaft,
accessible from outside the shaft

Key features
The lifts designed in compliance with CABIFIT-DF model are characterised by the gearbox placed in a side wall of the shaft, safely contained in a space with a key-locked door cover.
The control panel, main supply and light switches can be placed inside a cabinet at any landing door.

Benefits
The key features are the same as those already described for the CABIFIT model. However, CABIFIT-DF does not need space for the CABIFIT cabinet at the side of the shaft wall, but the minimum shaft width must be about 50 mm larger and the shaft wall thickness must be at least 200-250 mm (depending on speed). The dimensions of the cabinet containing the control panel and the dimensions of the equipment aperture in the shaft wall where the gearbox frame is placed, are always the same, regardless of the installation features. Both gearbox and cabinet can be placed at any landing.

Safety
The cabinet can be opened only by a specific key. When it is open, it clearly indicates the area necessary for maintenance and rescue operations. Compared to models with gearbox in the upper part of the shaft, the assembling is easier and can be accomplished in a standing position (the gearbox is fixed to the landing floor and rests on a special frame, therefore its position is extremely stable). Maintenance operations can be carried out from the floor.
Stopping devices for the car are not required during gearbox maintenance and it is not necessary to control the machine from the outside.
Comparing this model to those with the machine in the shaft headroom, maintenance operations can be carried out from the floor.
The rescue operations can be carried out by any trained person and are always possible in any fault situation.