IGV - Products - Save programme

Electric traction lift with the gearbox in the pit and indirect suspension (1:1)

Lifts in compliance with ELEKTROFIT21 models differ from ELEKTROFIT models only by the type of suspension: direct (1:1) for ELEKTROFIT, indirect (2:1) for ELEKTROFIT21. The dimensions of the shaft are much reduced.

Most of the lift load is applied to the car and counterweight guide rails, thus no beam connecting to the shaft walls is necessary.
In the ELEKTROFIT models the noise and vibrations source caused by the machine are limited by the fact that they are at the bottom of the shaft. Owing to the frequency control system, using a high quality inverter, a high standard of ride comfort, reduced current consumption peaks and consequent energy and money saving, reduced mechanical stresses and reduced temperature of the gear motor are obtained.

Versions for lifts with rated load
up to 630 kg
The plan of the shaft at the landing shows where the portal including the controller, the main and lighting switches is placed. At the other landings the portal must be replaced by a masonry structure.

Versions for lifts with rated load
up to 1000 kg
The plan of the shaft at the landing shows where the portal including the controller, the main and lighting switches is placed. At the other landings the portal must be replaced by a masonry structure.